Personalizzabile con il tuo logoGrafica gratuitaDal primo ordine alla grande produzione
Prodotto neutro, senza stampaDal primo ordine alla grande produzioneSpedizione gratuita da 1.000 €

Custom Double Wall P2P Paper Cups 450cc Full Color Printing

Custom 450 cc double-walled P2P paper cups, Ø90 mm and 138 mm high, made of Paper2Paper cardboard with water-based internal barrier instead of polyethylene (PE) film, suitable for contact with food, for hot and cold drinks. The double wall can also be held in the hand with hot drinks, without sleeve; glossy or matt outer wall, of your choice. Full color printing on the entire wall. Cardboard of 1,000 pieces, minimum 1 cardboard.

Features

Material
Paper2Paper Property
Pieces per carton
1000
Size / Capacity
Top.Ø90 H.138mm / 450ml(15,2oz)
Production tolerance
+/- 15%
Tempi in settimane lavorative: 1 settimana = 5 giorni (lun–ven), escluse festività.La settimana di consegna al corriere è indicativa e considera l’approvazione del file grafico entro 48 ore.La settimana di consegna al corriere indicata è una stima.
Configuratore

Configura il tuo ordine

Prezzi IVA esclusa · Spedizione gratuita da 1.000 € di imponibile
1
Scegli la quantità
Più cartoni ordini, più risparmi
2
Opzioni e ordine
Scegli le opzioni e aggiungi al carrello
Press
Expedition
External finish
Quantity

Riepilogo prezzo
Si aggiorna con quantità e opzioni
Importo mancante per ottenere
la spedizione gratuita:
€1,000.00
  • Bank transfer
  • Deferred payment in 3 installments
Grafica gratuita
Prepariamo noi la bozza, senza costi
Approvi prima di produrre
Nessuna stampa senza il tuo ok
Pagamento in 3 rate
Carte, PayPal, bonifico
Spedizione gratuita
Da 1.000 € di imponibile prodotti
Assistenza dedicata
Lun–ven, 8:30–17:30
Oltre 5.000 aziende
Clienti in Italia e in Europa
Pagamento in 3 rate
Carte, PayPal, bonifico
Spedizione gratuita
Da 1.000 € di imponibile prodotti

Descrizione

The 450 cc double-walled P2P paper cup is a disposable cup for hot and cold drinks, customizable with your Full color print graphics on the entire wall. It measures 90 mm in diameter at the mouth and 138 mm in height. It is made of Paper2Paper cardboard: inside it has a water-based barrier instead of polyethylene (PE) film. Between the two walls there is a layer of air that insulates: the cup can be held in the hand even with hot drinks, without a sleeve.

In summary

  • Capacity: 450 cc (15.2 oz), measured flush with the edge
  • Measurements: mouth Ø90 mm, height 138 mm
  • Wall: double, with air layer between the inner and outer wall
  • Material: Paper2Paper cardstock with water-based internal barrier instead of polyethylene (PE) film
  • Usage: hot and cold drinks; holds in the hand without sleeve
  • Food contact: suitable, compliant with Reg. (EC) 1935/2004, Reg. (EC) 2023/2006 and BfR Recommendation XXXVI
  • Marking on the bottom: PAP code 21 and Paper2Paper logo
  • After use: it is disposed of in the paper collection, according to the indications of your municipality
  • Printing: Full colour, four-colour offset (CMYK), also with full background
  • Printing area: the entire wall of the glass
  • External finish: glossy or matte, your choice
  • Cliché: 50 €, you pay only once; in reorders of the same graphics you don't pay
  • Packaging: carton of 1,000 pieces (tolerance +/- 15%); cups in paper sleeves, cartons closed with paper tape
  • Minimum quantity: 1 carton, equal to 1,000 pieces
  • Times: Express in 6 working weeks
  • Lids: compatible with Ø90 mm lids for cardboard cups

What is the 450 cc cup used for?

It is the large format for hot take-away drinks, such as latte macchiato, drip coffee and large cup tea. It is also good for cold drinks. Bars, coffee shops, coffee shops, caterers and events that want to bring their own brand to every drink served choose it.

What is P2P cardstock

P2P stands for Paper2Paper, the name of our supplier's cup board. The inside is lined with a water-based barrier that retains liquids, instead of the polyethylene (PE) film of traditional paper cups. The bottom of the cup is marked with the PAP 21 code and the Paper2Paper logo: after use, the cup is placed in the paper collection, according to the instructions of your municipality. The packaging is also made of paper: the cups arrive in paper sleeves, in cartons closed with paper tape.

How Full color printing works

Full color printing is four-color offset printing (CMYK): it reproduces logos, photographs, shades and solid backgrounds on the entire wall of the glass. On the junction of the wall there may be a slight misalignment of the graphics, about 1.5 mm: it is advisable not to place small texts or important details right at that point.

In double-walled glasses, you can choose the finish of the external wall, glossy or matt, in the configurator at no additional cost. On the glossy finish, the colors are more vivid and bright, on the matte more subtle. In both cases, the external wall is made of recycled cardboard, slightly gray: the white parts of the graphic therefore appear slightly gray. If your design has a lot of white, our team helps you evaluate the performance before production.

The cliché, i.e. the printing system prepared for your graphics, costs €50 and is paid only once: you do not pay for reorders of the same graphics. You can upload your design to the configurator or ask our team to prepare it, free of charge. Before production, you receive the draft to be approved.

You can find all formats, single-wall from 115 to 450 cc and double-walled from 250 to 450 cc, in the P2P paper cups with Full color printing category. If you prefer a cup with a PE film barrier, you will also find customized paper cups with full color printing. Other models in the cups and straws section.

Frequently Asked Questions

How much does the glass contain?

450 cc measured at edge level, equal to about 15.2 oz, with a 90 mm mouth and a height of 138 mm. By leaving some space under the edge, the quantity served is less.

Do you need a sleeve with hot drinks?

No. The double wall creates an insulating layer of air: the glass can also be held in the hand with hot drinks, without a sleeve. It is also suitable for cold drinks.

What does P2P mean?

P2P stands for Paper2Paper, the name of our supplier's cardboard: a cup board with a water-based inner barrier instead of polyethylene (PE) film.

What is the difference with paper cups with PE film?

The difference is in the internal barrier that retains liquids: in bicchieri p2p it is water-based, in traditional paper cups it is a polyethylene (PE) film. The bicchieri p2p are marked on the bottom with the PAP 21 code and after use they are disposed of in the paper collection, according to the indications of your municipality. The printing is Full color in both cases. You can find the models with PE film among the customized paper cups with full color printing.

Is the glass suitable for contact with food?

Yes. According to the supplier's specification, it complies with Reg. (EC) 1935/2004, Reg. (EC) 2023/2006 and BfR Recommendation XXXVI on paper and cardboard in contact with food.

How do you dispose of the glass?

The PAP 21 code and the Paper2Paper logo are marked on the bottom: after use, the cup is disposed of in the paper collection, according to the instructions of your municipality.

Where is the artwork printed?

On the entire wall of the glass, with Full color printing in four-color printing, even with a full bottom. We advise you not to put small texts or important details on the junction of the wall, where there may be a slight misalignment of about 1.5 mm.

Will the colors be the same as those in the draft?

It depends on the finish: on the glossy wall, the colours are more vivid and bright, on the matte wall, they are softer than on the screen. The outer wall is made of slightly grey recycled cardboard, so the white of the graphics appears slightly grey. Our team helps you assess the performance before production.

Is it better glossy or matte?

It depends on the effect you are looking for. The glossy finish makes the colors more vivid and brilliant, and is suitable for colorful graphics and photographs; the matte one gives softer colors and a more sober look. The two finishes have the same price and the same cliché from €50: choose the one you prefer in the configurator.

What is cliché and how much does it cost?

The cliché is the printing system prepared for your design. It costs €50 and appears in the configurator summary. You only pay the first time: you don't pay for the same design reorders.

What is the minimum quantity?

1 carton, i.e. 1,000 cups. A production tolerance of +/- 15% on the quantity delivered is expected.

How long does it take for production?

Express production takes 6 working weeks from the approval of the draft.

Which covers are compatible?

The cup has a 90 mm mouth: you can use the Ø90 mm lids for cardboard cups. You can find them among the lids for cardboard cups; if you have doubts about the most suitable model, ask our team.

Dal logo alla consegna

Come funziona

  1. Ordina online
    Scegli quantità e opzioni e aggiungi al carrello.
  2. Approva la bozza gratuita
  3. Produzione e consegna
    In settimane lavorative: la settimana di consegna al corriere è indicata sopra.
Richiedi una campionatura
Dall’ordine alla consegna

Come funziona

  1. Ordina online
    Scegli quantità e opzioni e aggiungi al carrello.
  2. Conferma e pagamento
    Carta, PayPal, bonifico o pagamento in 3 rate.
  3. Preparazione
    Prepariamo e imballiamo il tuo ordine.
  4. Consegna
    In settimane lavorative: la settimana di consegna al corriere è indicata sopra.
Richiedi una campionatura

Non hai trovato quello che cercavi?

Parla con un nostro consulente: lunedì–venerdì, 8:30–17:30.

You're in good company

Over 5,000 companies rate our products
★★★★★
Assistenza

Domande frequenti

Le risposte alle domande che riceviamo più spesso su tempi, pagamenti, spedizioni e personalizzazione.

Fai una domanda

No: our graphics department prepares the draft at no cost and submits it to your approval before production.

The times are estimated in working weeks and vary from product to product. In this sheet you will find the approximate week of delivery to the courier, estimating the approval of the graphic file within 48 hours.

Shipping is free upon reaching € 1,000 of taxable product income (excluding VAT); for lower amounts, the costs are calculated based on weight.

By credit card, PayPal, bank transfer or with payment deferred in 3 installments.

Yes, you can request a sample from the Try Before Ordering page.

You can find all the information in the guide Uploading graphic file. If you have any doubts, our consultants help you from 8:30 to 17:30.

Customer questions & answers

No questions about the product at the moment,